LED airport runway lights

LED airport runway lights are available in five colors: red, green, yellow, blue and white.The new ground LED airport runway lights have several advantages. First, LED airport runway lights in the evening open automatically, dawn automatically shut down, without the need of personnel management, human consumption is reduced; second, all devices are integrated into a lamp lens, lens using industrial PC material, has good impact resistance and anti water, can work in harsh environment;Third, the lamp has the advantages of convenient installation; fourth, LED airport runway lights all-weather charging more than 120 hours of continuous work full time; fifth; use of lamps dome design, this design not only protect the solar panels, and can avoid the birds landing, snow etc.

In a larger airport, a standard lighting system will be installed on the runway, allowing the aircraft to take off at night and use the airport runway lights. From the landing plane, the runway begins with a row of green runway entrance lights and ends with a row of red runway end lights at the end. The edge of the runway has a border light with a white light, and the blue (or purple) lights on both sides are the taxiways. The center line has a central line lamp, usually white, but there are also the yellow and white intervals between the rear segments of the runway and the final yellow light to indicate the end of the runway. Some of the runways are illuminated by the landing area, and a white light is mounted on both sides of the middle line 3000 feet from the entrance of the runway. In order to help drivers to correct the descent of airplane descending at night, a group or two groups of light groups called "visual approach slope indicator (VASI)" are installed near the runway end. This is a row of lights that illuminate the front of a row of lights. A filter glass is placed in front of each lamp, red under white, a baffle not far ahead in front of the lamp, and a adjustable narrow slot on the baffle. As the light passes through the narrow seam, it is irradiated along the slope of the plane. Look at this group of lights from the aircraft. If the driver sees all the white light, it indicates that the aircraft is flying too high. If the driver sees all the red light, it indicates that the aircraft is flying too low. Only when the driver sees the white light on the red, the plane is right and can land safely. After landing, the plane slid forward, and there was a green light at the exit of the runway indicating that the driver could drive out of the runway and enter the taxiway. The taxiway has a middle line light, and the color of the light is green. The lights on both sides of the taxiway are blue. From the taxiway to the apron, there are bright floodlight lights, and workers and passengers can act as easily as they do in the daytime. The airport at night is a world of lights made up of many colorful lights. The scenery is spectacular.